Images are illustrative and will be replaced with photographs of the actual product. Final appearance is confirmed by the approved sample.
Foundation Anchor Bolts
Product code — to be assigned
L-shaped and J-shaped anchor bolts cast into concrete foundations to fix columns, frames and equipment bases.
- L-bend and J-bend configurations
- Thread length to foundation drawing
- Template packing for site setting out
- Thread diameter
- M20 – M42 (confirm per drawing)
- Overall length
- 300 – 1500 mm to drawing
- Bend type
- L-bend / J-bend / straight with plate
- Material
- Q235B or Q355B
Quoting from Handan, Hebei Province, China. Reply capacity depends on the completeness of the specification supplied with the enquiry.
Product information
Foundation anchor bolts transfer column uplift and shear into the concrete foundation. The bent leg is embedded in the pour, while the threaded section above the base plate receives the nut and washer.
Length, bend radius, thread length and plate pattern are produced to the foundation drawing. Hot-dip galvanizing is the usual choice for exposed or humid sites; confirm the coating specification with the project engineer.
Typical applications
- Column base fixing
- Equipment and machine bases
- Pre-engineered building frames
Packing & delivery
- Bundled by bolt length and diameter
- Threads protected with plastic caps
- Setting-out templates packed per column grid
Customization (confirmed per order)
- Bend geometry to foundation drawing
- Template plates for anchor positioning
- Extended thread for grout and levelling allowance
Material & finish
- Material
- Carbon structural steel Q235B · Q355B
- Finish
- Hot-dip galvanized · Zinc plated · Plain
- Standard reference
- Dimensional reference to project foundation drawing — no standard compliance is claimed until confirmed.
Frequently asked questions
Can anchor bolts be supplied with setting templates?
Yes, where the column base plate layout is provided. Templates are made to the bolt pattern so anchors stay in position during the concrete pour.
Which galvanizing thickness is standard?
Coating class depends on the project specification. State the required coating mass or thickness and it will be quoted against the drawing.
Request a quotation
The product name is already attached to this form. Add the dimensions, quantity, material and finish required, and attach a drawing if one exists.
- tangtiemetal@163.com
- Phone / WhatsApp
- +86 16619861146
- Location
- Handan, Hebei Province, China
Related products
All productsHigh-Strength Structural Bolt Sets
Bolt, nut and washer sets for slip-critical and bearing connections in steel frames, supplied in matched sets.
M16 – M30
Threaded Rods & Studs
Fully threaded rods and cut studs for bracing, tie rods, hanger connections and general structural assembly.
M8 – M36