IllustrativeImages are illustrative and will be replaced with photographs of the actual product. Final appearance is confirmed by the approved sample.
Wedge Anchor
Product code — to be assigned
Through-fixing mechanical anchor with an expansion clip at the embedded end, used for heavy fixtures in concrete.
- Through-fixing, single operation
- Zinc plated or stainless steel
- Sizes from M6 to M24
- Thread diameter
- M6 – M24
- Length range
- 40 – 300 mm
- Anchor type
- Through-fixing wedge anchor
- Base material
- Concrete
Quoting from Handan, Hebei Province, China. Reply capacity depends on the completeness of the specification supplied with the enquiry.
Product information
The wedge anchor is set by tightening the nut, which pulls a wedge through an expansion clip and clamps the anchor against the hole wall. It is a through-fixing, so the fixture is installed at the same time as the anchor.
Selection depends on hole diameter, effective embedment depth, edge distance and the load case. Confirm these values with the project engineer; the anchor is supplied to the diameter and length requested.
Typical applications
- Steel column base fixing
- Guardrail and handrail anchorage
- Equipment mounting
Packing & delivery
- Boxed by diameter and length
- Quantity and size printed on the label
- Palletized cartons for export
Customization (confirmed per order)
- Length to suit fixture thickness
- Stainless grade to project requirement
- Special head configurations on request
Material & finish
- Material
- Carbon steel · Stainless steel 304 / 316
- Finish
- Zinc plated · Hot-dip galvanized · Stainless mill finish
- Standard reference
- Dimensions to the requested size list — load values and approvals are not published until verified documentation is provided.
Frequently asked questions
How is the correct anchor length chosen?
Effective embedment plus fixture thickness plus nut and washer allowance. The project engineer should confirm the embedment depth for the load.
Do you supply load tables?
Only verified test data is published. Request the document for the specific diameter and it will be confirmed before quotation.
Request a quotation
The product name is already attached to this form. Add the dimensions, quantity, material and finish required, and attach a drawing if one exists.
- tangtiemetal@163.com
- Phone / WhatsApp
- +86 16619861146
- Location
- Handan, Hebei Province, China
