Curtain Wall Accessories
Spider fittings, hangers, brackets, embedded plates, chemical anchors and stainless fixings used to attach facade panels to the building structure.
- Scope
- Hangers, brackets, embeds, anchors, screws
- Typical finishes
- Hot-dip galvanized, zinc plated, stainless
- Order basis
- Drawing or facade system schedule
A curtain wall is carried by a chain of small components: the embed cast into the slab, the bracket that takes up construction tolerance, the hanger that receives the panel, and the fastener that ties the assembly together. Each joint in that chain sets the position of everything after it, so these parts are supplied as a matched set rather than to a nominal size alone. Point-fixed glass uses a spider fitting to pick up four panels at one node — the shortest tolerance chain in the system, where the part has to be made to the system rather than to a catalogue number.
Components are produced to drawing — plate thickness, slot length, hole pitch, weld position and finish are confirmed before production starts. Tell us the facade system, the panel weight and the substrate, and the bracket, embed and anchor can be quoted as one assembly instead of separate items.
What helps us quote accurately
- Product drawing, or a dimensioned sketch / sample
- Material grade and surface finish requirement
- Quantity per size, and whether sizes are mixed in one order
- Destination port and any documentation required
Products in this series
7 items
Curtain Wall Brackets
Galvanized angle brackets with slotted holes, used to take up slab tolerance when fixing a facade sub-frame.
Plate 4 – 10 mm, leg length to drawing
Curtain Wall Hangers
Two-piece stainless hangers that receive the panel and allow adjustment before the joint is locked.
Thickness 1.5 – 3.0 mm, form to drawing
Channel & Plate Embeds
Cast-in plates and channel embeds with welded anchors, set into the slab before the concrete is poured.
Plate 6 – 20 mm, size to drawing
Chemical Anchors
Capsule and injection anchors for post-installed fixing where a cast-in embed is not available.
M8 – M24
Stainless Steel Fasteners
A2 and A4 stainless bolts, nuts and washers for facade connections exposed to weather.
M6 – M20
Self-Drilling Screws
Hex-head self-drilling screws with bonded washers, for fixing flashing, panels and trim to the sub-frame.
ST4.2 – ST6.3, length 25 – 150 mm
Spider Fittings
Cast stainless spiders and glass connectors that pick up point-fixed glass panels at a single node.
Arm length to the point layout
Catalogue notice
Specifications shown are a working catalogue under verification. Final size, grade and finish are confirmed on the approved drawing or sample before order.
Typical applications
Other series
Send a drawing.
Include the drawing or size list, material and finish, quantity and destination port. The reply can then be a quotable offer, not a general price range.