Curtain Wall Brackets
Product code — to be assigned
Galvanized angle brackets with slotted holes, used to take up slab tolerance when fixing a facade sub-frame.
- Slotted holes for site tolerance
- Plate thickness 4 – 10 mm
- Hot-dip galvanized or stainless
- Plate thickness
- 4 – 10 mm (confirm per drawing)
- Leg length
- Made to drawing
- Hole type
- Slotted or round, per connection detail
- Material
- Q235 / Q355 carbon steel, or 304 / 316 stainless
Quoting from Handan, Hebei Province, China. Reply capacity depends on the completeness of the specification supplied with the enquiry.
Product information
Curtain wall brackets carry the dead load and wind load of the facade from the sub-frame into the slab. The slotted holes let the installer correct for tolerance in the concrete edge before the frame is locked off, which is why slot length and hole pitch matter as much as plate thickness.
Brackets are cut and bent from plate to the project drawing: leg length, slot position, bend radius and weld details are set per connection. Supplied plain, zinc plated or hot-dip galvanized, with stainless grades where the facade faces a chloride environment.
Typical applications
- Facade sub-frame fixing to slab edge
- Stone and panel cladding support
- Tolerance adjustment at structural openings
Packing & delivery
- Bundled by size and plate thickness
- Steel-strapped bundles on export pallets
- Quantity and drawing number on the label
Customization (confirmed per order)
- Slot length and pitch to the system schedule
- Bend angle and leg length to drawing
- Stainless grade for coastal projects
Material & finish
- Material
- Q235 carbon steel · Q355 carbon steel · Stainless steel 304 / 316
- Finish
- Hot-dip galvanized · Zinc plated · Stainless mill finish
- Standard reference
- Produced to the project drawing. Steel grades follow GB/T 700 and GB/T 1591. Load values and approvals are not published until verified documentation is provided.
Frequently asked questions
How is the plate thickness chosen?
It follows the load on the bracket and the fixing gauge. Send the facade system schedule or the connection drawing and the thickness will be confirmed against it.
Can brackets be supplied as a set with the embeds?
Yes. Where both parts come from the same drawing package they are produced and packed together, so the slot positions line up on site.
Request a quotation
The product name is already attached to this form. Add the dimensions, quantity, material and finish required, and attach a drawing if one exists.
- tangtiemetal@163.com
- Phone / WhatsApp
- +86 16619861146
- Location
- Handan, Hebei Province, China
Related products
All products
Channel & Plate Embeds
Cast-in plates and channel embeds with welded anchors, set into the slab before the concrete is poured.
Plate 6 – 20 mm, size to drawing
Curtain Wall Hangers
Two-piece stainless hangers that receive the panel and allow adjustment before the joint is locked.
Thickness 1.5 – 3.0 mm, form to drawing