Square Bend Bolts
Product code — to be assigned
Square-bend bolts that wrap a hollow section on three sides to resist rotation.
- Square bend resists rotation
- J-bolt for single-side access
- Galvanized after forming
- Thread diameter
- M8 – M24 (confirm per drawing)
- Form
- Square bend / J-bolt / hook
- Inside width
- To the clamped section
- Material
- Q235 carbon steel
Quoting from Handan, Hebei Province, China. Reply capacity depends on the completeness of the specification supplied with the enquiry.
Product information
These are the two bent forms that a straight bolt cannot replace. A square bend wraps a rectangular hollow section on three sides, so the bolt cannot rotate while the nut is run down; a single-end bolt has one threaded leg with a hook or a bend at the other, used where access exists on one side only.
Both are formed from bar and then threaded, so the bend radius and the leg centres are set by the former. Galvanizing follows forming, which is the only way to cover the outside of the bend.
Typical applications
- Rectangular hollow section clamping
- Guardrail and fence anchorage
- Single-side tie-down
Packing & delivery
- Bundled by size with nuts fitted
- Steel-strapped bundles on pallets
- Size and quantity on the label
Customization (confirmed per order)
- Inside width to the section
- Hook radius and leg length
- Thread length per fixing
Material & finish
- Material
- Q235 carbon steel
- Finish
- Hot-dip galvanized · Zinc plated · Plain
- Standard reference
- Produced to the clamping detail: inside width, leg centres, thread length and bend radius come from the drawing. Load values are not published.
Frequently asked questions
Why a square bend instead of a U-bolt?
A square bend sits flat against a rectangular section on three faces, so it cannot turn while the nut is tightened. A U-bolt on a square section only contacts at the corners.
Can the hook be closed after installation?
Only if it is supplied soft. Galvanized or hardened hooks are formed before coating and should not be bent on site.
Request a quotation
The product name is already attached to this form. Add the dimensions, quantity, material and finish required, and attach a drawing if one exists.
- tangtiemetal@163.com
- Phone / WhatsApp
- +86 16619861146
- Location
- Handan, Hebei Province, China
